SoftRemoteLT™

version 10.0.4 (Build 6) Readme

This installation package contains the SafeNet SoftRemoteLT™ VPN client product.

System Requirements

• IBM-compatible computer with Pentium processor or equivalent (not Alpha platforms)

• Compatible operating systems and minimum RAM:

  Operating system	Minimum RAM
  Microsoft® Windows® 95	16 MB
  Windows 98 and Windows NT® Workstation 4.0	32 MB
  Windows Me and 2000 Professional	64 MB
  Windows XP Home and Professional	64 MB; 128 MB recommended

• 10 MB hard disk space

• Native Microsoft TCP/IP communications protocol

• Non-encrypting modem

• Native Microsoft PPP dialer for dial-up connections

• Ethernet for network connections

• Microsoft Internet Explorer 4.0 or later

Back to top

Installing

Before installing the SoftRemoteLT software, read the Release Notes for technical issues concerning this release. If you encounter any problems during the installation, check the Release Notes for the solution.

1. If you're installing this product on Windows NT or Windows 2000, log on as administrator or its equivalent.

2. Run the setup.exe file that's on the installation CD-ROM or in the installation package.

3. Work through the installation wizard:

   Note: The SafeNet VPN Adapter, which supports L2TP, is installed only when these network components are already installed on your computer:

   Operating system	Component
   Windows 95	Dial-Up Networking with the Microsoft Dial-Up  Networking 1.3 Upgrade
   Windows 98 and Me	Dial-Up Networking
   Windows NT	Remote Access Server (RAS)

   Because Windows 2000 and Windows XP use the native Windows L2TP adapter, the SafeNet L2TP adapter isn't installed on computers running these operating systems.

4. When the installation completes, click Finish. Make sure that your computer restarts.

Back to top

Upgrading

To upgrade to this version of SoftRemoteLT, take these steps:

1. Uninstall the current version on your computer through Control Panel>Add/Remove Programs:

   1. In the uninstall wizard, on the Maintenance dialog box, click Remove. This removes all the client product's components, but not your security policy.

   2. The Uninstall Security Policy dialog box prompts you to delete your security policy, which includes any certificates and private keys:

      • To keep it, click No. You can import your security policy after you install the new version of SoftRemoteLT.

      • To delete it, click Yes.

   3. When the Maintenance Complete dialog box opens, click Finish.

   4. Make sure that your computer restarts.

2. Install this new version of SoftRemoteLT.

Getting Started

SoftRemoteLT contains two primary modules:

• Security Policy Editor to configure and maintain the security policy

• Certificate Manager to request, store, and administer certificates

To access these modules and the SoftRemoteLT help, go to Start>Programs>SoftRemoteLT.

Back to top

© 2003 SafeNet, Inc. All rights reserved.

SafeNet is a registered trademark and SoftRemoteLT is a trademark of SafeNet, Inc.

Other product and company names may be the trademarks of their respective owners.